Elecraft KX1 Zero Beat Mod

 

KX1 left 31This time I wanted the K6XX CW Indicator mod in my Elecraft KX1 QRP rig.   Simple enough but had to carefully fit everything in the crowded case.

 

KX1 LED 33 LED and dropping resistor glued in with hot glue... messy but effective and won't bee seen from outside the case.

 

KX1 CB 32The Zero-Beat PCB tucked away in the upper right hand corner.

 

    

KX1 on 35 Finished... the tiny yellow light is seen at the lower left corner.